Using The Online Printer Management Tool; Configuring Printer Settings - Kodak HERO 4.2 Extended User Manual

: A printer with a wireless connection is listed as the name of the printer plus a number (for example,
KodakHERO4.2+XXXX). If a different printer name appears, click Select, then choose your wirelessly
connected printer.
4. Under Tools, select Online Printer Management.
The Online Printer Management Tool opens.
From a computer or mobile device:
: Your computer or mobile device must be connected to the same network as your printer.
1. Get the IP Address of your wirelessly connected printer:
a. On your printer control panel, press
b. Touch , then touch Network Settings.
c. Touch View Network Configuration, then touch
xxx.xxx.xxx.xxx. (See
:
2. On your computer, open your preferred Internet browser (such as INTERNET EXPLORER, FIREFOX, SAFARI,
CHROME).
3. Type the printer IP Address in the browser address (URL) bar, then press Enter.
The Online Printer Management Tool opens.

Using the Online Printer Management Tool

Configuring printer settings

1. Open the Online Printer Management Tool (see
2. Select the Settings tab.
3. Select Device > General or Date & Time, and make any necessary changes.
.
Viewing the network configuration,
If you prefer a printout, touch
Network Configuration Page prints, including the IP Address in the format xxx.xxx.xxx.xxx.
www.kodak.com/go/aiosupport
KODAK HERO 4.2 All-in-One Printer
until you see your printer IP Address in the format
10).
to select Print Network Configuration, then touch OK. A
Accessing the Online Printer Management Tool, 16).
17