Scanning To A Memory Card Or Usb Flash Drive - Kodak ESP OFFICE 2100 Extended User Manual

Scanning

Scanning to a memory card or USB flash drive

72
To scan to a memory card or USB flash drive:
1. Load the original(s) (see
2. Press Scan on the printer control panel.
3. Press to select Scan to Memory Card or Scan to USB Flash Drive, then press
OK .
4. Press to select an option, then press
Scan Option
Scan What Photo
(default)
Document
File Type JPG (default)
Single-page PDF
Multi-page PDF
Original 1-sided (default) Original document is printed on one side.
2-sided
Scan Size Auto (default)
2 x 3
3.5 x 5
4 x 6
4 x 7
4 x 8
5 x 7
4 x 12
8 x 10
8.5 x 11
A4
8.5 x 14
Save as No / Yes
Defaults
5. Press Start Black to make a black-and-white scan, or press Start Color to make
a color scan. The scanned file appears at the destination you specified.
www.kodak.com/go/aiosupport
Loading originals for scanning, page
Settings
Sets the scan settings for scanning a picture
(see Changing the scan settings for scanning
from the printer control panel, page
Sets the scan settings for scanning a document
(see Changing the scan settings for scanning
from the printer control panel, page
The scanned file is saved as a JPG.
The scanned file is saved as a single-page PDF.
The scanned file is saved as a multiple-page PDF.
Original document is printed on both sides of the
page. Select this only if you are scanning both
sides of the page and have loaded the document
into the ADF.
Determines the size that is scanned.
To save the settings as the new default, press
OK. With Yes selected, press OK.
70).
or to change the setting.
Description
67).
67).