Making A Call; Making A Call With The Voice Commands Function - Garmin maps plus more User Manual

User's manual maps + more
13.4

Making a call

With the hands-free module you can make a call in various ways:
13.4.1

Making a call with the voice commands function

It is particularly convenient to make a call with the voice commands
function.
1. In the H
you want to use to make the call (see "Activating a mobile phone"
on page 144).
2. In the H
Then say "Call".
►
The V
Specifying a phone number
3. Say "Telephone number".
Say the number that you want to call.
Note: You have to say each number separately but you can say the
numbers in blocks. For example, say "nine-four-three-three" for the
number block 9433.
4. Wait for the numbers you said to appear.
Repeat steps 3 to 4 until the complete phone number is shown on
the display. Say "Correction" if the last number you said was not
understood correctly.
5. Say "Call".
The phone number will be dialled.
Calling a contact from the phone book
3. Say "Phone book".
4. Say the name of the contact you want to call.
If several entries are recognised as matching this name, a list with
these entries will appear.
Say the number in front of the contact that you want to call.
►
If several phone numbers are saved for this contact, a list with
these numbers will appear.
Say the number in front of the phone number that you want to call.
►
The connection will be established.
- 148 -
ANDSFREE MODULE
ANDSFREE MODULE
window opens.
OICE COMMAND
window activate the mobile phone which
window tap on Voice command.
Handsfree module