Navigation In Offroad Mode; Map Options In Navigation Mode; Quitting Navigation - Garmin maps plus more User Manual

9.4.4

Navigation in Offroad mode

Note: This mode does not become active if you have selected a
pedestrian route profile for the navigation. These profiles can be
identified by the
Nor does it become active if you are navigating along a track (see
"Navigation in Track mode" on page 72).
If you enter a destination which lies off the digitalised road system, the
navigation will guide you first in Vehicle mode to the point of the
digitalised road system that lies nearest to the destination. From here
the navigation then continues in Offroad mode.
If the current position at the beginning of navigation lies off the
digitalised road system, the navigation will guide you first in Offroad
mode to the nearest point of the digitalised road system. From here the
navigation then continues in Vehicle mode.
Navigation in Offroad mode works like navigation in Pedestrian mode
(see "Navigation in Pedestrian mode" on page 70).
There are only a few differences:
The part of the route already covered is not shown.
►
The Recalculate route function is not available.
►
9.4.5

Map options in Navigation mode

Tap on Options.
►
A window with several buttons opens.
The most important functions for navigation can be reached via buttons
with symbols.
Other functions are found by tapping on one of the buttons Destination,
Route, Services or General.
A description of all available options can be found in the chapter
"Options, more functions" on page 59.
9.4.6

Quitting navigation

You quit the navigation in the same way in all modes:
Tap on
►
prompt you to confirm.
Working with the map
(Pedestrian) symbol.
(Back) in order to quit navigation. A dialog box will
User's manual maps + more
- 73 -