Garmin maps plus more User Manual page 58

User's manual maps + more
Note: The MyRoutes function can be used only for routes with only one
route point. For routes with two or more route points only one route is
calculated and displayed, regardless of whether you have activated the
function or not.
Note: Even when the MyRoutes function is activated, sometimes only
one additional route or no additional routes at all can be calculated for a
particular route. No further suggestion is then shown on the button in
question.
Start navigation
Tap on the button of the route which you want to use for the
►
navigation.
Traffic obstruction along the route
If you select a route for which traffic obstructions have been announced,
the P
REVIEW
"Preview TMC" on page 106).
Select whether you want to use the original route (Current route) or
►
a detour (Alternative route).
Driving range warning
The
route under the following circumstances:
With the vehicle's current driving range you cannot reach the
►
destination.
With the vehicle's current driving range you can reach the
►
destination, but from there you cannot reach a charging station.
If you select a route with range warning, you will be asked whether you
want to calculate a Multi-Stop route.
Note: The Multi-Stop route considers charging stations along the route
and includes essential charging stops in the route calculation if the
destination is not within range. Consideration is given to all private
charging stations (Favourites) as well as to the public charging stations
recorded in the map.
Traffic information (TMC) is then available to a limited extent only.
For more details refer to the chapter "Multi-Stop route" on page 99.
Note: If the planned route includes a track, no range warning can be
issued. Nor is it possible to calculate a Multi-Stop route.
- 58 -
TMC window may open before the navigation starts (see
(Driving range warning) symbol will appear alongside the
Navigation