Garmin maps plus more User Manual page 48

User's manual maps + more
Turn-by-Turn list
If you want to see detailed directions for the route, tap on Options >
►
Turn-by-Turn list.
For details of the functions in the window refer to chapter "Turn-by-Turn
list" on page 95.
MyRoutes
When the MyRoutes function is activated, the navigation system
calculates up to three routes on the basis of the currently selected route
profile and shows them on the map in different colours (blue, green,
red) and with a number. For each route there is a button with the same
number and a symbol in the same colour.
When calculating the time of arrival or the trip time, the navigation
system takes account of additional factors such as day of the week,
time of day and particularly your previous driving profile.
The route which corresponds best to the selected route profile is
marked with "MyRoute".
Note: Even when the MyRoutes function is activated, sometimes only
one additional route or no additional routes at all can be calculated for a
particular route. No further suggestion is then shown on the button in
question.
Start navigation
Tap on the button of the route which you want to use for the
►
navigation.
Traffic obstruction along the route
If you select a route for which traffic obstructions have been announced,
the P
REVIEW
"Preview TMC" on page 106).
Select whether you want to use the original route (Current route) or
►
a detour (Alternative route).
Driving range warning
The
route under the following circumstances:
The destination is out of range.
►
With the vehicle's current driving range you can reach the
►
destination, but from there you cannot reach a charging station.
If you select a route with range warning, you will be asked whether you
want to calculate a Multi-Stop route.
- 48 -
TMC window may open before the navigation starts (see
(Driving range warning) symbol will appear alongside the
Navigation