Garmin maps plus more User Manual page 61

Route profile: Opens the R
for route planning and, if necessary, change them.
Routes and tracks: Opens the R
routes, manage planned routes and start navigation on a planned route
(see "Tracks and multi-leg routes" on page 52).
Save as favourite: Saves the selected destination to the F
"Saving destinations" on page 49).
Save destination: Saves the selected address in the F
"Saving destinations" on page 49).
Save Position: Opens the S
your current position under a certain name in the F
Save route: Opens a window in which you can save the planned route under a
specific name (see "Saving routes" page 55).
Saved routes and tracks: Opens a window in which you can load a saved route
or a track.
Settings: Opens the S
system (see "Configuring the navigation system" on page 161).
Show map: Opens the map in Standard mode (see "Map in Standard mode" on
page 62).
Show on map: Shows the selected address on the map.
Sightseeing tours: Opens the S
a sightseeing tour and start the navigation on a tour (see "Sightseeing
tours" page 91).
Simulation: Simulates a navigation on the route indicated. This simulation can
be performed without GPS reception. On multi-leg routes, only the first
leg is simulated.
Skip current destination: Tap on this button to omit the next route point. This
button is active only when at least 2 route points still lie ahead of you
(see "Tracks and multi-leg routes" on page 52).
Start recording, Stop recording: Starts or ends the recording of a track (see
"Tracks" on page 83).
Options, more functions
OUTE PROFILE
OUTES AND TRACKS
AVE DESTINATION AS
window. Here you can configure the navigation
ETTINGS
IGHTSEEING TOURS
User's manual maps + more
window. Here you can view the options
window. Here you can plan
AVOURITES
AVOURITES
window. Here you can save
AVOURITES
window. There you can select
list (see
list (see
list.
- 61 -