Selecting A Media Source - Garmin maps plus more User Manual

User's manual maps + more
12.2.2

Selecting a media source

The current source is indicated on the Media source button (AUX, BT,
CD or SD).
1. Tap in the M
The media source list opens.
►
►
►
►
The current source is marked by a coloured dot (red).
Tap on the source which has the files you want to listen to.
For details of how to connect a Bluetooth-capable device to the
navigation system refer to the chapter "Bluetooth connection" on
page 141.
Note: Not all Bluetooth-capable devices are 100% compatible.
Depending on the device, some functions may not be supported at all or
only with limitations.
Note: When the navigation device is not mounted in the vehicle, AUX
and CD are not listed.
When the AUX input is deactivated in the car radio settings, AUX is not
listed. For details refer to the manual issued for your radio.
Note: When playing back files with BT-Audio, dropouts may occur if the
distance between the navigation device and the connected device
(mobile phone, smartphone or Bluetooth-capable MP3 player) is too big
or if there are objects between the devices.
Note: A change of memory card is detected only when the device has
been switched on. If the memory card is not detected, insert it again
when the device is on and running.
- 132 -
P
EDIA LAYER
AUX: An external device which is connected by cable to the
AUX input of the car radio. For details refer to the manual
issued for your car radio.
BT-Audio: A device (mobile phone, smartphone or Bluetooth-
capable MP3 player) which is connected by Bluetooth to the
navigation device. The device must support the Bluetooth
protocol A2DP. When two such devices are connected to the
navigation device, both are listed here.
CD: A CD which is inserted in the car radio. For details refer to
the manual issued for your car radio.
SD card: An SD card which is inserted in the navigation device.
window on the Media source button.
Media