Carpet Cleaning - Vax VCW-01 Instruction Manual

Vax VCW-01 User Guide.qxd

6. Carpet Cleaning

Fill remainder of clean water tank with warm (max 40ºC)
tap water. Replace cap (Fig 6/1).
Fig.6/1
Place bottom of clean water tank into carpet washer and
rotate top into position until the clean water tank Latch
snaps into place (Fig 6/2).
Fig.6/2
Plug cord into electrical socket. Step on the power on/off
pedal to turn cleaner on (Fig 6/3).
NOTE: Never leave unit unattended with power
!
on. Turn off when emptying and filling tanks. Do
not oversaturate the carpet.
Fig.6/3
21/12/07 09:20 Page 7
Step onto handle release pedal to put into cleaning
position (Fig 6/4).
Fig.6/4
While depressing solution spray trigger, push carpet
washer in forward motion. Release trigger and pull unit
backwards in same path to remove dirty water and
solution from carpet. (For heavily soiled areas, repeat if
necessary) (Fig 6/5).
Fig.6/5
!
motion.
!
tank is full and must be emptied.
IMPORTANT: For best cleaning results use a
steady, moderate, forward and backward
IMPORTANT: If the sound of the motor changes
to a high pitch, this indicates the dirty water
carpet cleaning
user guide
7