Cleaning and maintenance
Removing and refitting the dirt container
WARNING: Always remove the battery before carrying out any maintenance or troubleshooting.
1
1. Squeeze the latch on the dirt
container to release.
2. Tilt and lift to remove from the
handheld.
Emptying the dirt container
CAUTION: Don't over fill the dirt container to avoid blocking the air flow through the machine.
For best cleaning results, empty the dirt container after every use. Filters should be tapped over a
bin every 4-6 uses to remove dirt and debris and washed every 3 months. Filters should be replaced
every 6-9 months depending on the level of use.
1
1. Squeeze the latch on the dirt
container to release.
2. Tilt and lift to remove from the
handheld.
12
2
To assemble align the white arrows.
Rotate the dirt container onto the
handheld. Push until it clicks into place.
2
Hold the dirt container over a bin and
press the dirt release button to allow
dirt and debris to fall out.
When correctly fitted all 3 connection
points will be aligned and will sit flush.
To close, push the dirt release door until
it clicks into place.