Related Manuals for Vax AirPetVCAP1500
Summary of Contents for Vax AirPetVCAP1500
-
Page 1: User Guide
Designed in the UK User Guide VCAP1500 Performance is everything. vax.com.au... -
Page 2: Table Of Contents
Contents Contents Machine Overview General Safety Information Getting Started Maintenance Looking After Your Machine – Filters Looking After Your Machine – Advanced cleaning Looking After Your Machine – Removing blockages FAQs Other Information... -
Page 3: Machine Overview
12. Pre-motor fi lter 13. Turbo brush 14. Combination fl oor head 15. Telescopic extension tube 16. Dusting brush 17. Crevice tool 18. Flexible hose and handle 19. Mini turbo tool 20. Upholstery tool 21. Connector for Mini turbo tool vax.com.au... -
Page 4: General Safety Information
The appliance should only be used as described in the quick start guide and in the full user guide. Only Vax recommended attachments should be used with this appliance. Do not use this vacuum cleaner if it has been dropped, damaged, left outdoors or dropped into water. - Page 5 IMPORTANT: If the inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the blockage(s) before re-starting the vacuum cleaner. IMPORTANT: Vax recommends the use of Residual Current Device Rating of 30mA or less. IMPORTANT: It is very important that filters are kept clean to obtain maximum performance from your vacuum cleaner.
-
Page 6: Getting Started
Getting Started Assembling your vacuum cleaner CAUTION: The vacuum cleaner is a very powerful unit. Before plugging the cord into the electrical socket, make sure the switch is in the ‘o ’ position. Hold the vacuum cleaner rmly when starting and in use. NOTE: The Mini Turbo Tool (with Turbo Tool connector attached), Turbo brush, crevice tool, upholstery tool and dusting brush can all be attached to the telescopic tube or hose handle. -
Page 7: Maintenance
Packing away and storage Emptying and cleaning the dirt container NOTE: For best cleaning results the dust bin should be emptied after each use and at the very least when the ‘MAX’ mark has been reached. vax.com.au... -
Page 8: Looking After Your Machine - Filters
Looking After Your Machine - Filters Cleaning the pre-motor lter NOTE: Replace the lter when discoloured or damaged (frequency will depend on level of use). WARNING: Water temperature should not exceed 40°C when washing the pre-motor lter. WARNING: Ensure lter is completely dry before inserting back into the vacuum cleaner. 24hr... - Page 9 Tap to clean the post-motor lter and put back in place. Left wheel Left wheel Insert the cover back with the symbols being horizontal. Follow the instruction to lock the cover until it clicks back in place. vax.com.au...
-
Page 10: Looking After Your Machine - Advanced Cleaning
Looking After Your Machine - Advanced Cleaning Advanced cleaning - primary separator WARNING: Ensure separator is completely dry before inserting back into the vacuum cleaner. 24hr Advanced cleaning - cyclone separator NOTE: Replace the lter when discoloured or damaged (frequency will depend on level of use). WARNING: Always switch o and unplug the vacuum cleaner from the electrical socket before assembling, opening or emptying the dirt container, or before connecting/disconnecting the attachments. -
Page 11: Looking After Your Machine - Removing Blockages
Turbo Tool, ensure that the tabs are engaged and pivot the lower housing closed. Slip the locking ring over the neck of the Mini Turbo Tool and into the groove to nish. vax.com.au... - Page 12 Looking After Your Machine - Removing Blockages Removing blockages from the Turbo brush Lay the Turbo brush fl oor head on a fl at surface and turn over to expose the brushbar. Using a pair of scissors, cut through any threads or hairs caught by the brushbar that have wrapped around the guides.
-
Page 13: Faqs
What do I do if the unit/an accessory becomes damaged or broken? • We’re here to help. Simply call AU 1300 361 505 / NZ 0800 800 900 or visit vax.com.au Why won’t the accessories pick up properly? •... -
Page 14: Other Information
8.30am to 5.00pm If you have queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. - Page 15 Notes vax.com.au...
- Page 16 Distributed by Techtronic Industries Australia Pty. Ltd. Level 1, 660 Doncaster Road, Doncaster, Australia 3108. Service Line: AU: 1300 361 505 / NZ: 0800 800 900 Performance is everything. vax.com.au...