Vax VCW-01 Instruction Manual page 9

Table of Contents

Advertisement

Vax VCW-01 User Guide.qxd
To remove, press down on the locking button and pull the
tool away from the hose. (Fig 7/6).
Fig.7/6
Hold the tool approximately 1" above the stained surface.
Press the solution dispense trigger to apply cleaning
solution to the stained area (Fig 7/7)
Fig.7/7
Gently scrub the stained area with the brush on the tool
until the stain is completely removed. Release the solution
dispense trigger and continue moving the tool over
cleaned area to remove as much liquid as possible. (Fig 7/8)
Fig.7/8
21/12/07
09:20
Page 9
8. Filters
Emptying and cleaning the dirty water tank and filter
The carpet washer is equipped with a shut off valve within
the dirty water tank. When the dirty water tank becomes
full, the float will rise, shutting off the air flow through the
nozzle.
!
For best results, use smooth, steady motion keeping
Locking button
the nozzle flat against the carpet. Tipping the carpet
washer and breaking the seal of the nozzle and carpet
will cause the float to rise and shut off the suction.
Once the float is activated, empty the dirty water
tank. If the dirty water tank does not appear full, press
the Power on/off pedal and wait for the float to settle
and reset. If the float repeatedly shuts off the suction,
empty the dirty water tank. For best results, use only
Vax AAA Carpet Cleaner. Other solutions may generate
excessive foam which will cause the float to rise
prematurely and shut off the suction. Use 4 (four)
capfuls of Vax AAA Carpet Cleaner per fill up of the
clean water tank. A higher concentration of carpet
cleaner may cause excessive foaming.
!
empty the dirty water tank.
!
water tank.
Grasp top of dirty water tank handle and push latch to
release (Fig 8/1).
Handle
Fig8/1
NOTE: The float in the carpet washer will shut
off the suction when the dirty water tank is full.
NOTE: There will be a noticeable change in the
pitch of the cleaner. This indicates a need to
WARNING: To reduce the risk of injury from
moving parts - unplug before emptying the dirty
Latch
accessories/ filters
user guide
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents