Configuring Time Setting; Figure 17 Time Setting; Table 16 Time Setting - ZyXEL Communications ZyAIR G-2000 PLUS User Manual

4.6 Configuring Time Setting

To change your ZyAIR's time and date, click the SYSTEM link under ADVANCED and then
the Time Setting tab. The screen appears as shown. Use this screen to configure the ZyAIR's
time based on your local time zone.

Figure 17 Time Setting

The following table describes the labels in this screen.

Table 16 Time Setting

LABEL
Time Protocol
Time Server Address
Current Time
(hh:mm:ss)
Chapter 4 System Screens
DESCRIPTION
Select the time service protocol that your time server sends when you turn on
the ZyAIR. Not all time servers support all protocols, so you may have to check
with your ISP/network administrator or use trial and error to find a protocol that
works.
The main difference between them is the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC 868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
The default, NTP (RFC 1305), is similar to Time (RFC 868).
Select None to enter the time and date manually.
Enter the IP address or the URL of your time server. Check with your ISP/
network administrator if you are unsure of this information.
This field displays the time of your ZyAIR.
Each time you reload this page, the ZyAIR synchronizes the time with the time
server.
ZyAIR G-2000 Plus User's Guide
68