Figure 61 Trigger Port; Table 47 Trigger Port - ZyXEL Communications ZyAIR G-2000 PLUS User Manual

Figure 61 Trigger Port

The following table describes the labels in this screen.

Table 47 Trigger Port

LABEL
#
Name
Incoming
Start Port
End Port
Trigger
Start Port
End Port
Apply
Reset
Chapter 10 Single User Account (SUA) / Network Address Translation (NAT)
DESCRIPTION
This is the rule index number (read-only).
Type a unique name (up to 15 characters) for identification purposes. All characters
are permitted - including spaces.
Incoming is a port (or a range of ports) that a server on the WAN uses when it sends
out a particular service. The ZyAIR forwards the traffic with this port (or range of ports)
to the client computer on the LAN that requested the service.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
The trigger port is a port (or a range of ports) that causes (or triggers) the ZyAIR to
record the IP address of the LAN computer that sent the traffic to a server on the WAN.
Type a port number or the starting port number in a range of port numbers.
Type a port number or the ending port number in a range of port numbers.
Click Apply to save your changes back to the ZyAIR.
Click Reset to begin configuring this screen afresh.
ZyAIR G-2000 Plus User's Guide
150