Figure 119
Getting Started
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
14. Dial-in User Setup
15. NAT Setup
20.5.1 System Management Terminal Interface Summary
Table 83 Main Menu Summary
#
MENU TITLE
1
General Setup
2
WAN Setup
3
LAN Setup
4
Internet Access Setup
11
Remote Node Setup
12
Static Routing Setup
14
Dial-in User Setup
15
NAT Setup
21
Filter and Firewall Setup
22
SNMP Configuration
23
System Security
24
System Maintenance
26
Schedule Setup
99
Exit
20.6 Changing the System Password
Chapter 20 Introducing the SMT
ZyAIR G-2000 Plus SMT Main Menu
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
Enter Menu Selection Number:
DESCRIPTION
Use this menu to set up your general information.
Use this menu to clone a MAC address from a computer on your LAN.
Use this menu to set up your LAN and WLAN connection.
Configure your Internet Access setup (Internet address, gateway, login, etc.) with
this menu.
Use this menu to configure detailed remote node settings (your ISP is also a
remote node) as well as apply WAN filters.
Use this menu to set up static routes.
Use this menu to set up local user profiles on the ZyAIR.
Use this menu to specify inside servers when NAT is enabled.
Use this menu to configure filters, activate/deactivate the firewall and view the
firewall log.
Use this menu to set up SNMP related parameters.
Use this menu to change your password.
This menu provides system status, diagnostics, software upload, etc.
Use this menu to schedule outgoing calls.
Use this to exit from SMT and return to a blank screen.
ZyAIR G-2000 Plus User's Guide
ZyAIR G-2000PLUS Main Menu
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Security
24. System Maintenance
26. Schedule Setup
99. Exit
256