Speedometer Unit - Yamaha FX Nytro FX10X Owner's Manual

1. Warning light "
2. Self-diagnosis warning indicator "
3. Two-digit code "84"
ESU12720

Speedometer unit

The speedometer unit is equipped with the
following:
a digital speedometer (which shows the
G
riding speed)
an odometer (which shows the total dis-
G
tance traveled)
a tripmeter (which shows the distance trav-
G
eled since it was last set to zero)
an engine speed meter (which shows the
G
engine speed; not for use while riding)
warning indicators (which show self-diag-
G
nosis, coolant temperature, fuel level, and
oil level warnings)
indicator lights (which show high beam and
G
low coolant temperature conditions)
a warning light (which shows warnings to-
G
gether with the warning indicators)
a fuel meter (which shows the fuel remain-
G
ing in the fuel tank)
a grip/thumb warmer level indicator (which
G
shows the grip warmer or the thumb warm-
er level)
After the main switch is turned on, the warning
light, the low coolant temperature indicator
light, and all segments of the meter display
turn on and off once.
"
"
Control functions
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
1. Warning light "
2. Low coolant temperature indicator light
" "
3. Meter display
Odometer, tripmeter, and engine
speed meter modes
Pushing the "SELECT" button switches the
display between the odometer mode "ODO",
tripmeter mode "TRIP", and engine speed
meter mode "r/min".
To reset the tripmeter, push the "RESET" but-
ton for at least 1 second while the tripmeter is
displayed.
1. "SELECT" button
2. "RESET" button
NOTE:
To switch the speedometer, odometer, and
G
tripmeter displays between kilometers and
miles, select the odometer mode "ODO",
"
11