Toshiba Satellite 1400 User Manual page 87

CD/DVD Play button
Power is off If an audio CD is in the drive,
the system enters CD Player Windows Media Player
mode and operates as a
stand-alone CD player.
If a DVD-Video disk is in the
drive, the operating system
starts and the DVD-Video
player starts.
CD player DVD-ROM drive power
mode turns off.
OS is running If an audio CD is in the drive,
Windows Media Player
starts and CD audio play
begins.
If a DVD-Video disk is in the
drive, the DVD-Video player
starts and DVD-Video play
begins.
The CD/DVD icon is
displayed in the Windows
Task Bar.
NOTES: 1. To play Digital Audio Data, you must set the play list in the
Windows Media Player. The next time you play Digital
Audio Data in succession, the former play list will become
active. If a CD was played the previous time, then All Audio
will be used.
2. When the computer system power is off, if no control button
is activated within four minutes of turning on the DVD-
ROM drive power, power to the drive will automatically be
turned off. In this case, press the CD/DVD Play button
again to turn on the power.
CAUTION: Do not install or remove a memory module while the DVD-
ROM drive power is on. First turn off the power to the DVD-ROM drive.
Using optical media drives
Digital Audio Play button
Operating system starts,
starts and Digital Audio
Data play begins.
Operating system starts,
Windows Media Player
starts and Digital Audio
Data play begins.
Windows Media Player
starts and Digital Audio
Data play begins.
The Digital Audio icon is
displayed in the Task Bar.
4-7