Table of Contents
Advertisement
11. Choose Reboot for the change to take effect.
12. Select the printer in Windows' Add Printer Wizard. To access the Add
Printer Wizard utility, click Start, point to Settings, click Printers
and double click the Add Printer icon.
External monitor
An external analog monitor can be connected to the external monitor port on the
computer. The computer supports VGA and Super VGA video modes. To connect a
monitor, follow the steps below.
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor's power on.
4. Turn the computer on.
When you turn on the power, the computer automatically recognizes the monitor
and determines whether it is color or monochrome.
You can use the HW Setup program to select between Auto-Selected and
Simultaneous displays. Refer to Chapter 7,
details on HW Setup.
If you have selected Simultaneous under the Display options of the HW
Setup program, both the external monitor and the internal LCD will be active when
you turn on the computer. If Auto-Selected is selected, only the external
monitor will be active.
To change the display settings, press Fn + F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn + F5 to switch to the internal
display. Refer to Chapter 5,
the display setting.
HW Setup and
The Keyboard,
for details on using hot keys to change
Parallel printer
Passwords, for
8-11
- Quick Links:
- Equipment Checklist
Hide quick links:
Advertisement
Table of Contents
