2. Turn the computer upside down and remove the battery and two screws
securing the memory module socket cover.
3. Slide your fingernail or a thin object under the cover and lift it off.
4. Push the latches to the outside to release the module. A spring will force one
end of the module up.
5. Grasp the module and pull it out.
CAUTION: Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access problems.
Figure 8-7 Removing the memory module
6. Seat the cover and secure it with two screws.
7. Replace the battery.
Additional AC adaptor
8-9