Power On Display - Toshiba Satellite 1400 User Manual

Display
This tab lets you customize your computer's display settings for either the internal
LCD screen or for an external monitor.

Power On Display

Lets you set the display to be used when the computer is booted.
Auto-Selected
Simultaneous
NOTE: You cannot select TV display in HW Setup. To display on a TV
screen use hot keys Fn + F5. Refer to Chapter 5,
CPU (Satellite 2400 series only)
NOTE: This feature appears only on computers with Mobile Intel®
Pentium® 4 processor-M.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Dynamically Switchable
Always High
Always Low
Selects an external monitor if one is connected. Other-
wise, it selects the internal LCD. (Default)
Selects both the internal LCD and external monitor for
simultaneous display.
CPU power consumption and clock speed
automatic switching function is enabled.
When the computer is in use, CPU operation
is automatically switched when necessary.
(Default)
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at its fastest speed.
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption
and low speed.
HW Setup
Keyboard.
7-5