Connecting The Ac Adaptor - Toshiba Satellite 1400 User Manual

Portable personal computer
Hide thumbs Also See for Satellite 1400:
Table of Contents

Advertisement

Have your eyes examined regularly and visit a doctor promptly, if you suspect
you might be suffering from a repetitive strain injury.
A number of books are available on ergonomics and repetitive strain injury or
repetitive stress syndrome. For more information on these topics or for pointers on
exercises for such stress points as hands and wrists, please check with your library
or book vendor. Also refer to the computer's Safety Instruction Manual.

Connecting the AC adaptor

Attach the AC adaptor when you need to charge the battery or you want to operate
from AC power. It is also the fastest way to get started, because the battery pack
will need to be charged before you can operate from battery power.
The AC adaptor can be connected to any power source supplying from 100 to 240
volts and 50 or 60 hertz. For details on using the AC adaptor to charge the battery
pack, refer to Chapter 6,
CAUTION: Use of the wrong adaptor could damage your computer.
TOSHIBA assumes no liability for any damage in such case. The current
rating for Satellite 2400 series computer is 75 W, 15 VDC, 5 amperes,
and the current rating for Satellite 1400 series computer is 60 W, 15
VDC, 4 amperes .
1. Connect the power cord to the AC adaptor.
Figure 3-2 Connecting the power cord to the AC adaptor
Power and Power-Up Modes.
(for Satellite 2400 series)
Connecting the AC adapter
3-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents