F-Code Confidential Transmission - Sharp MX-FXX1 Manual

F-CODE CONFIDENTIAL TRANSMISSION

Follow the steps below to send a confidential fax by adding an F-code to the fax number.
1
Ready to send.
Scan
Fax
Mode Switch
A4
Image
Settings
Memory TX
Direct TX
Auto Reception
Fax Memory:100%
2
(3)
To
Cc
AAA AAA
CCC CCC
EEE EEE
ABCD
Frequent Use
3
This function can be used in combination with a broadcast transmission or timer transmission. A F-code confidential
transmission can also be stored in a program.
Speaker
Send
Address Book
Auto
Sub Address
Special Modes
Quick File
(1)
(2)
Condition
1/1
BBB BBB Address Review
DDD DDD
Sub Address
FFF FFF
OPQRST UVWXYZ
EFGHI JKLMN
Sort Address
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
Enter the destination fax number.
Resend
(1) Touch the [Address Book] key.
(2) Touch the one-touch key of the desired
destination.
File
Touch the one-touch key in which the destination fax
number and F-code are stored.
(3) Touch the [To] key.
☞
CALLING UP A FAX NUMBER FROM THE ADDRESS
BOOK
Settings
If the fax number of the transmitting machine is not stored in a
one-touch key in the Address Book, enter the fax number and
Global
F-code with the numeric keys.
(1) Enter the fax number of the destination.
(2) Touch the [Sub Address] key to enter "/".
(3) Enter the sub-address.
(4) Touch the [Sub Address] key to enter "/".
(5) Enter the passcode.
Press the [BLACK & WHITE START] key
( ).
Scanning begins.
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
• If you are scanning the original on the document glass, scan
each page one page at a time. When scanning finishes,
place the next original and press the [BLACK & WHITE
START] key (
scanned and then press the [Read-End] key.
A beep will sound to indicate that scanning is finished.
109
(page 36)
). Repeat until all pages have been