F-Code Dialling - Sharp MX-FXX1 Manual

F-CODE DIALLING

When performing an F-code operation, the F-code (sub-address and passcode) is appended to the fax number that is
dialled. Check the F-code (sub-address and passcode) programmed in the memory box in the other machine before you
perform an F-code transmission. It is convenient to store an F-code together with the fax number in a one-touch key or
group key.
Fax number of other machine
When the following F-code functions are used, your machine dials the other machine.
F-code confidential transmission, F-code polling reception, F-code relay request transmission
When the following F-code functions are used, the other machine dials your machine.
F-code confidential reception, F-code polling memory, F-code relay broadcast transmission
• If the destination machine does not have a passcode configured in the F-code, do not enter a passcode when dialling that
machine.
• F-code communication cannot be performed when using the speaker or performing manual transmission.
System Settings for Fax: Direct Address / Program
This is used to store and edit one-touch keys and group keys.
☞
Storing a One-touch (Individual) Key for Fax
Key or Program
0123456789
(page 147)
/
AAAAAAAA
* Sub-address
(page 136), Storing a Group Key
107
/
XXXXXXXX
* Passcode
(page 141), Amend/Delete a One-touch
* Touch the [Sub
Address] key in the
screen to enter "/" .