Sharp MX-FXX1 Manual page 80

C 1
Special Modes
C 2
Card Shot
X
X
Y
Y
4
X
• The send size is automatically selected based on the original size you entered. The send size can also be changed
manually.
• To complete the setting and return to the screen of step 3, touch the [OK] key next to the [Cancel] key.
Fax
Auto
Mode Switch
Exposure
Image
Settings
Standard
Resolution
Memory TX
Direct TX
X 86 Y 54
Original
Auto Reception
Fax Memory:100%
(1)
5
Fax
Scan Size
Original
X 86 Y 54
2-Sided
Booklet
2-Sided
Tablet
Cancel
Size Reset
(25 210 )
86
mm
Fit to
(25 210 )
54
mm
Send Size
(1) (A) (B)
Y
Address Book
Sub Address
Special Modes
Special Modes
Quick File
(2)
Send Size
Auto B5
Image Orientation
Enter the original size with the key.
OK
(1) Enter the original size.
OK
• With the [X] key highlighted, enter the X (horizontal)
length of the original with the
• Touch the [Y] key and enter the Y (vertical) length of the
original with the
(2)
(A) To return the original size to the default size, touch
the [Size Reset] key.
(B) To automatically enlarge or reduce the image size
to the send size, touch the [Fit to Send Size] key.
Do not touch this key if you wish to scan the original
at the original size that you entered.
(2) Touch the [OK] key.
Changing the original scan size and
send size.
If you do not need to change the scan size or send size, go to
step 6.
File
(1) Touch the [Image Settings] key and then
touch the [Original] key.
(2) Change the scan and send size.
(3)
• Touch the [Scan Size] key to return to step 4. Specify
the size.
OK
• Touch the [Send Size] key to display the send size
selection screen. Touch the desired send size key and
touch the [OK] key.
(3) Touch the [OK] key.
79
keys.
keys.