When The Line Is Busy; Occurs - Sharp MX-FXX1 Manual

WHEN THE LINE IS BUSY

If the line is busy when you send a fax, transmission will be re-attempted automatically after a preset interval. This
function only operates in memory transmission mode. In direct transmission mode or manual transmission mode, the
transmission will be cancelled. Wait briefly and then try sending the fax again.
To cancel transmission...
Cancel a transmission job in the job status screen.
☞
CANCELLING A FAX IN PROGRESS OR A RESERVED FAX
System Settings for Fax (Administrator):
This is used to set the number of recall attempts and the interval between attempts when the connection cannot be
established because the line is busy. The factory default setting is 2 attempts at an interval of 3 minutes.
WHEN A COMMUNICATION ERROR OCCURS
If a communication error occurs or the other fax machine does not answer the call within a preset period of time,
transmission will be re-attempted automatically after a preset interval. This function only operates in memory
transmission mode.
To cancel transmission...
Cancel a transmission job in the job status screen.
☞
CANCELLING A FAX IN PROGRESS OR A RESERVED FAX
System Settings for Fax (Administrator):
This is used to set the number of recall attempts and the interval between attempts when a transmission fails due to an error.
The factory default setting is attempt at an interval of 3 minutes.
(page 55)
Recall in Case of Line Busy
(page 55)
Recall in Case of Communication Error
17
(page 183)
(page 183)