Additional Functions (Customizing The Consumer Parameters) - Smeg Dishwasher Instruction Manual

Do not use table salt as it contains insoluble substances which,
over time, may damage the water softening system.
When necessary, refill the regenerating salt container before
starting the washing program. In this way, the excess saline
solution will be immediately removed by the water; the prolonged
presence of salt water inside the tank may lead to corrosion.
Be careful not to confuse the salt and detergent packages; adding
detergent to the salt container will damage the water softening system.
ADDITIONAL FUNCTIONS
(available in all programs except the soak program)
The electronic control system allows personalizing the machine use
directly through a programming procedure not directly accessible that
allows: regulate water hardness level.
To access the programming environment, the appliance must be turned
on with the door open. Then proceed as follows:
press the PROGRAM DELAY button
on the display, followed by the number currently set (e.g. H3)
press the PROGRAM DELAY
needed to select the right setting level for the hardness of the water
(H0, H1, H2, H3, H4, H5);
N.B.: after few seconds the appliance exits the parameter setting menu
automatically.
22
User instructions
(Customizing the consumer parameters)
until the H symbol appears
button the number of times