Enersave; "Flexi Tabs" (On Some Models Only) - Smeg Dishwasher Instruction Manual

User instructions

ENERSAVE

This option can be selected with the wash programme of choice to
further reduce energy consumption. Drying is aided by a special
device that automatically releases the door, which opens slowly and
smoothly by a few centimetres. This ensures perfect drying and greater
control of rinsing temperatures, which can be kept at lower levels for
significant energy saving. Once the door has opened, the end of the
wash cycle is indicated by a short beep.
Enersave is activated automatically every time a wash cycle is
selected (except for programs that do not include the final drying phase;
see programs table) and can be disabled before the program is started.
Flexi Tabs, once selected, remains enabled until intentionally disabled.
When the function is activated, opening of the door must not be
impeded in any way; do not leave anything in the space in front of the
door necessary to allow it to open.
Do not re-close the door during automatic opening as this would
damage the mechanism. Wait for the pushers to retract before re-closing
the door.

"Flexi Tabs" (on some models only)

The option is optimised for use of detergents which are complete with
salt and rinse aid, known on the market as, "triple action", etc. With this
option activated, any salt and rinse aid If you wish to use detergents
which already contain salt and rinse aid already in the dishwasher will
not be used.
With short programs, because there is less time for them to dissolve,
tablets may fail to wash effectively and undissolved residues may be left.
Powder detergents are more suitable for these programs.
- N.B.: even with the "Flexi Tabs" option selected, the
regenerating salt/rinse aid lights will still stay on if their
containers are empty.
IMPORTANT: when no longer required, the option must be disabled
(the light goes out).
19