Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Smeg Manuals
  4. Dishwasher
  5. Dishwasher
  6. Instruction manual

Smeg DISHWASHER Instruction Manual

Guide for using the dishwasher and the washing programs
Hide thumbs Also See for DISHWASHER:

Advertisement

Quick Links

Download this manual See also: Instruction Manual, User Manual
INSTRUCTION MANUAL
GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS

Advertisement

loading

Related Manuals for Smeg DISHWASHER

Summary of Contents for Smeg DISHWASHER

  • Page 1 INSTRUCTION MANUAL GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS...
  • Page 3 Thank you for choosing one of our products. You are advised to read this manual carefully; it contains all the information you need use your dishwasher safely, correctly and in the most satisfactory manner. Following the cleaning instructions provided here will keep your dishwasher's performance at peak levels in the long term.

  • Page 4: User Instructions

    1. Description of the controls 1.1 Upper panel All the dishwasher controls are grouped on the upper panel. Switching on, programming, switching off, etc. are only possible when the door is open. The panel shown is given as example: the form of the lights and buttons may vary depending on the model.
  • Page 5 Select this option when a short wash program is required (see programs table). ENERSAVE Energy saving option. PROGRAMS TABLE The manual may include the programs table for several models. The set of symbols at the top of the table indicates the programs available for your dishwasher.
  • Page 6 User instructions SWITCHING ON, SETTING THE WASHING PROGRAM AND STARTING THE PROGRAM Press the ON/OFF button (1); the PROGRAM INDICATOR LIGHT (2) will come on; Keep pressing the PROGRAM SELECTION button (3) until the indicator light for the required program lights up; Select the required option (if any, depending on models);...
  • Page 7 Cold rinse (2) residues. Rinse at 70° C IMPORTANT: see “NOTES AND REFERENCES” table on the following pages. If the dishwasher door is open or not properly closed, the washing cycle will not start. Models with ENERSAVE option Cold prewash...
  • Page 8 Wash at 65° C and FAST 1,20 dirt without dried-on Cold rinse residues. Rinse at 70° C IMPORTANT: see “NOTES AND REFERENCES” table on the following pages. If the dishwasher door is open or not properly closed, the washing cycle will not start.
  • Page 9 Rinse at 70° C IMPORTANT: see “NOTES AND REFERENCES” table on the following pages. If the dishwasher door is open or not properly closed, the washing cycle will not start. Models with ENERSAVE option Cold prewash...
  • Page 10 Wash at 65° C and FAST 1,20 dirt without dried-on Cold rinse residues. Rinse at 70° C IMPORTANT: see “NOTES AND REFERENCES” table on the following pages. If the dishwasher door is open or not properly closed, the washing cycle will not start.
  • Page 11 1 or 2 cold rinses depending on the model. REFERENCES for the ENERGY LABEL supplied with the dishwasher: Annual energy consumption is based on 280 standard wash cycles with cold water using low-energy operating modes. Actual figures will depend on the way in which the appliance is used.
  • Page 12 The baskets have been correctly loaded. The spray arms are able to rotate freely and without obstruction. The dishwasher door is securely closed. OPTION SELECTION Press the button to the required option; the corresponding light will come on to confirm activation.
  • Page 13 User instructions SPREAD HALF LOAD Suitable when there are not many dishes to be washed, it saves energy and reduces the program duration. Spread dishes across both baskets; the detergent dispenser should be loaded with less than the normal amount for a full load. ENERSAVE Allows energy consumption to be further reduced by opening the door automatically for better drying at the end of the wash cycle, ensuring...
  • Page 14 PROGRAM DELAY The start of the washing program can be delayed by from 1 to 24 hours depending on the model, to program the dishwasher to operate at the preferred time of day (e.g. overnight). ● It is not possible to select the option once the cycle has begun.
  • Page 15 Use the washing program that is most appropriate for each type of load. Do not carry out any preliminary rinsing. If available, connect the dishwasher to a hot water supply up to 60° C. TO REDUCE DETERGENT CONSUMPTION AND PROTECT THE...
  • Page 16 At the end of the program the beeper sounds briefly and the lights of programs no. 4 and 5 (marked "end") flash. To switch off the dishwasher, open the door and press the ON/OFF button (1). ENERGY MANAGEMENT After 5 minutes of inactivity (wash cycle completed, stopped or set but not started), the dishwasher switches to standby mode to reduce energy consumption.

  • Page 17: Operating Instructions

    Before replacing the cap, remove any salt residues from around the opening. When using the dishwasher for the first time, in addition to the salt it is also necessary to add one litre of water to the container.
  • Page 18 ADJUSTING THE WATER SOFTENING SYSTEM The dishwasher is equipped with a device which allows the softener setting to be varied to suit the hardness of the mains water. Adjustment is made using the PROGRAM SELECTION BUTTON (3).
  • Page 19 User instructions WATER HARDNESS TABLE German French SETTING degrees (° dH) Degrees (° dF) All lights off 0 - 6 0 - 11 (no salt) One light on 7 - 10 12 - 18 Two lights on 11 - 15 19 - 27 Three lights on 16 - 21...
  • Page 20 ADJUSTING THE RINSE AID DISPENSER SETTING The dishwasher is factory set for medium water hardness. It is possible to change this setting by turning the dispenser selector to the required position: the amount of rinse aid dispensed depends on the selector position.
  • Page 21 Do not use detergents formulated for washing dishes by hand, because they produce a great deal of foam and may negatively affect the operation of the dishwasher. Add the correct amount of detergent. An insufficient amount of detergent will result in a partial removal of dirt from the dishes, whereas an excessive amount is wasteful and does not improve the wash results.
  • Page 22 2.3 General warnings and recommendations Before using the dishwasher for the first time, it is advisable to read the following recommendations concerning dish types and loading. There are generally no constraints on washing of domestic dishes, but in certain cases it is necessary to take their characteristics into account.
  • Page 23 Silverware: silver items may stain. Glass and crystal: in general, glass and crystal objects can be washed in the dishwasher. However, certain types of glass and crystal may become dull and lose their clarity after many washes. Therefore, for these items we recommend using the most gentle program available.
  • Page 24 User instructions 2.4 Using the baskets The dishwasher has a capacity of 10 place-settings, including serving dishes. LOWER BASKET Used for items with a heavier degree of soiling. All types and combinations of loads are permitted, provided that the dishes, pots and pans are arranged with all the soiled surfaces exposed to the water jets coming from the bottom.
  • Page 25 User instructions BOTTOM BASKET INSERTS Some models are equipped with bottom basket inserts which improve the drying of dishes. The inserts are supplied in the accessories bag; to use them, simply fit them into place as shown. CUTLERY BASKET The cutlery should be arranged in an orderly manner inside the basket, with the handles pointing downwards.
  • Page 26 User instructions UPPER BASKET It is recommended to load the upper basket with small or medium-sized items such as glasses, small plates and saucers, tea or coffee cups, shallow bowls and light objects made from heat resistant plastic. If the upper basket is used in the lowermost position, it can also be loaded with serving dishes, provided they are only lightly soiled.
  • Page 27 User instructions ADJUSTING THE UPPER BASKET The height of the upper basket can be according to requirements and the size of the dishes in the lower basket. Pull-out adjustment system: Turn the retainer E on both runners, right and left, through 90° Remove the basket Lift the basket and fit the smaller pairs of wheels in the runners Return the retainers E to their original position...
  • Page 28 User instructions Quicklift position setting system: system with 3 position settings (1 lowest, 3 highest). The basket is snapped into the position required, lifting both sides simultaneously. To return to the lowest position from any height, lift the basket to the highest position and then release.

  • Page 29: Cleaning And Maintenance

    General warnings and recommendations Avoid the use of acidic or abrasive detergents. Clean the outer surfaces and door-lining of the dishwasher regularly using a soft, damp cloth or with a normal detergent suitable for painted surfaces.
  • Page 30 Assemble the spray arm unit by reversing the sequence described above. Warning: The wheel C can only be mounted in one position; the teeth D must engage properly. Fit the unit so that the wheel C is facing towards the door of the dishwasher.
  • Page 31 If any residues fall into the sump they might block hydraulic components or the spray arm nozzles. It is essential to thoroughly clean the filters according to the above instructions: the dishwasher cannot function if the filters are clogged. Carefully replace the filters to avoid damaging the pump.
  • Page 32 In some cases it is possible to remedy minor problems by referring to the following instructions: If the program fails to start, check that: The dishwasher is connected to the electricity supply There is no power outage The water tap is open...
  • Page 33 User instructions If the dishes fail to dry or remain dull, check that: The rinse aid container is not empty The rinse aid dispenser setting is correct The detergent used is of good quality and has not lost its effectiveness (for example, through incorrect storage, with the box left open) If the dishes show signs of streaking, staining etc., check that: The rinse aid dispenser setting is not too high...

  • Page 34: Troubleshooting

    User instructions 4. Troubleshooting The dishwasher is capable of signalling a number of faults by the simultaneous illumination of multiple indicator lights; the meanings are given below: FAULT DESCRIPTION Aquastop failure The anti-flooding system has activated (relevant models only). The system trips in case of water leaks.
  • Page 35 Alarms E5 and E6 interrupt the current program; once the problem is solved, the program will finish running. Alarm E7 is displayed at the end of the cycle which is finished regardless of the problem, as operation of the dishwasher is not affected. To reset an alarm: open and close the door, or turn the machine off and on again.
  • Page 36 User instructions TECHNICAL DATA Width 499 mm Depth measured flush with the 550 mm outer edge of the control panel Height (depending on models) from 820 mm to 870 mm Capacity 10 Standard place settings Water supply pressure min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar) Electrical characteristics See rating plate...