Electronic Programmer - Smeg Oven Instructions For The User

9. ELECTRONIC PROGRAMMER

LIST OF FUNCTIONS
TIMER BUTTON
COOKING DURATION BUTTON
END OF COOKING BUTTON
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
9.1 Setting the time
When the oven is used for the first time, or after an interruption in the electricity supply, the display
flashes at regular intervals, showing
same time press the value adjustment buttons
one minute for each pressure.
Press one of the two value modification buttons until the current time appears.
Before each programmer setting, activate the desired function and temperature.
9.2 Semi-automatic cooking
This function only switches the oven off automatically at the end of the cooking time. Press the
button and the display will light up showing the figures
time use the value modification buttons
When the
display will show the current time together with the symbols A and
9.3 Automatic cooking
This function switches the oven on and off in fully automatic mode.
Press the
at the same time use the value modification buttons
Press the
keep it pressed, and at the same time use the value modification buttons
of cooking time.
When the
time together with the symbols A and
40
Instructions for the user
button is released, the count of the programmed cooking duration will start and the
button and the display will light up showing the figures
button and the display will show the sum of the current time plus the cooking duration:
button is released, the programmed count will start and the display will show the current
. Press the and
or : this will increase or decrease the setting by
or to set the cooking duration.
or
.
buttons together, and at the
; keep it pressed, and at the same
.
; keep it pressed, and
to set the cooking duration.
or to adjust the end