Maintenance And Care; Machine Storage; Machine Care - Bissell PowerSteamer 1697 Series User Manual

M
aintenance and Care

Machine storage

once your cleaning is complete, make sure
the 2-in-1 water tank is emptied and rinsed out.
put the unit away in a closet or basement for
the next use. the smartmix tank can remain
filled and ready to go (store with machine set
to water only setting).
Note: Store cleaner in a protected,
dry area. Since this product uses
water, it must not be stored where
there is a danger of freezing. Freezing
will damage internal components and
void the warranty.

Machine Care

for best results, a few simple steps can assure
your machine is well maintained after your
cleaning is complete.
1. turn power switch OFF ( O ). unplug
the machine and wrap the power cord.
2. after emptying the 2-in-1 water tank, rinse
it out at a faucet with running hot tap
water, taking care to clean underneath
the heavy duty bladder, and all around it.
clean out lint trap.
3. Replace the 2-in-1 water tank on
the machine.
4. clean out the flow indicator filter each
time it is used to ensure best cleaning
performance. unscrew the flow indica-
tor cap, lift out the red rotor and white
filter. Rinse all three parts with water.
Replace the filter and rotor. Replace the
flow indicator cap. turn until snug, do
not over-tighten.
5. any loose hair or debris can be pulled
from the brush roll if desired and thrown
away.
6. Wipe the machine's exterior with a
soft cloth.
7. after carpet is dry, vacuum again to
remove hair and fuzz.
14
w w w . b i s s e l l . c o m
WARNING:
to reduce the risk of fire,
electric shock or injury, unplug
from the outlet before servicing.
Flow Indicator
ON
ON
4.
8 0 0 . 2 3 7 . 7 6 9 1