Table of Contents
Advertisement
Empty the Dirt Tank
WARNING
To reduce the risk of electric shock, turn power switch o and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
Empty once tank is full.
3
Hold the dirt tank over a trash container.
Press the bottom release button to
empty. Once empty, close the lid.
5
Clean cyclone with warm water and mild
detergent. Let cyclone completely dry
before replacing. To replace, fit into place
and twist to the right.
NOTE: The dirt tank may be washed in warm water with a mild detergent. Make sure it
is completely dry before replacing.
2
Press the tank release button and pull
out to remove dirt tank.
4
Twist cyclone left and pull down to
remove from tank.
6
click
After emptied,
place tank back
on vacuum and
press firmly until
you hear "click".
www.BISSELL.ca
7
Advertisement
Table of Contents
