Flow Indicator; Readytools Dial; Operations - Bissell PowerSteamer 1697 Series User Manual

S
pecial Features

Flow indicator

this is located on the machine base. it spins
when the trigger is pressed to indicate that
the machine is applying cleaning solution to
the carpet and will stop spinning when the
smartmix tank or bladder needs to be refilled,
or when the trigger is released.
Note: Flow indicator does not
spin when spraying through the
attachment hose.

ReadyTools dial

this provides either floor cleaning or above
the floor cleaning with the flip of a switch. if
choosing above floor cleaning for upholstery,
stairs, or along the baseboards, choose the
attachment appropriate for the job. attach tool
to the hose, and you are ready to go!
O
perations
1. plan activities to give your carpet time to dry.
2. move furniture to another area if cleaning
an entire room (optional).
3. thoroughly vacuum area with a dry
vacuum cleaner before deep cleaning.
4. plan your cleaning route to leave an exit
path. it is best to begin cleaning in the
corner farthest from your exit.
5. pretreating (optional)
NOTE: Pretreating is recommended
to improve cleaning effectiveness
for heavily soiled carpet in high
traffic areas such as entryways
and hallways.
a. spray the bissell tough stain pre-treat
formula onto heavy traffic areas, soiled
areas, or stains.
b. allow to penetrate for at least 3 minutes.
c. following the instructions below, clean
as normal, using the bissell powersteamer
machine on the high traffic setting.
8
w w w . b i s s e l l . c o m
ON
ATTENTION:
some berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggravate
this condition. please see stain
Removal instructions on page 12.
flow indicator
Readytools dial
8 0 0 . 2 3 7 . 7 6 9 1