Bissell PowerSteamer 1697 Series User Manual page 11

O
perations
Empty The 2-in-1 water tank
1. Remove the 2-in-1 water tank from the
base using the tank carry handle. carry
the tank like a bucket to a utility sink or
outside where you will dispose of the
collection water. Remove the top of the
tank by rotating the handle forward to
unlatch lid and lifting lid off tank.
2. empty collection water from bottom
of tank.
NOTE: You may notice hair &
debris deposits on the carpet or
in the tank that were loosened by
the cleaning action (especially with
newer carpets that have never
been deep cleaned before). This
debris should be picked up and
thrown away.
3. after each use, remove and rinse the lint
screen located on the tank lid.
4. Refill the tank in tank by referencing
"fill the 2-in-1 water tank" on page 9.
Remember to secure the top of the tank
by rotating the handle and test to make
sure it is secure before picking up.
5. Return 2-in-1 water tank to the machine.
Rinse (optional)
Rinsing is an optional step that can be done
during the cleaning process by switching to the
water rinse setting, or it can be done after the
carpeted area has been cleaned.
1. simply choose the water rinse setting
on the smartmix dial, and follow the
same path as you did for cleaning,
taking care to do a forward (wet)
stroke by depressing the trigger, a
backward (wet) stroke, and a forward
and backward (dry) stroke, releasing
the trigger. continue this until the water
you see coming up the nozzle is clear,
taking care not to over-wet the carpet.
w w w . b i s s e l l . c o m
WARNING:
to reduce the risk of fire and
electric shock due to internal
component damage, use only
bissell cleaning fluids intended
for use with the deep cleaner.
1.
3.
5.
1.
When filling bottle or
storing unit, set
dial to:
WATER
RINSE
8 0 0 . 2 3 7 . 7 6 9 1
8a.
2.
4.
11