Fill 2-In-1 Water Tank; Fill Smartmix/Formula Tank - Bissell PowerSteamer 1697 Series User Manual

O
perations
Fill the 2-in-1 water tank
1. Release the handle and lay the machine
handle back to access the tank.
2. Remove the tank from the base of the
machine by lifting the tank carry handle.
3. carry like a bucket to the sink. Rotate the
handle forward to unlatch the lid. lift off
and set the lid aside.
4. fill up the bladder with clean hot
tap water. *Do not boil or
microwave water as it can
destroy the bladder.
5. Replace the top of the tank by matching
the lid and tank edges. handle must
be in the forward position in order to
replace lid. Rotate the handle to the
carrying position to latch the lid.
NOTE: Remember to secure the lid
and test to make sure it is secure
before picking up the tank.
6. place tank into machine base, seating
firmly in place. Rotate tank handle back
into latched position. bring machine
handle back into upright position.
Fill the SmartMix/formula tank
1. lift the formula tank up and out of the
machine base.
2. fill the formula tank by first unscrewing
the cap and insert. always use genuine
bissell formulas to maximize cleaning
and for the safety of your machine.
fill with water to the water fill line, then
fill with formula to the formula fill line
and replace the cap and insert. place
formula tank into the slot in the back of
the machine for a snug fit.
NOTE: If bottle leaks, check
for proper positioning of red
gasket and straw insert.
w w w . b i s s e l l . c o m
WARNING:
to Reduce the Risk of fire and
electric shock due to internal
component damage, use only
bissell cleaning fluids intended
for use with the deep cleaner.
1.
3.
5.
1.
8 0 0 . 2 3 7 . 7 6 9 1
2.
4.
6.
2.
Red
gasket
9