Please Do Not Return This Product To The Store - Bissell PowerSteamer 1697 Series User Manual

T
roubleshooting
Cleaner not picking up solution.
Possible Cause
1. Ready tools dial may be on the wrong setting for the cleaning job. 1. Set ready tools dial to either or tools or pretreat
2. Nozzle window may not be properly attached.
3. 2-in-1 water tank lid is not properly installed.
4. 2-in-1 water tank is not properly seated.
5. Poor tool position. (Hand held attachments only).
6. 2-in-1 water tank has picked up maximum dirty water.
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
w w w . b i s s e l l . c o m
Remedies
floor cleaning.
2. Press down firmly on the black oval gasket at the top
window to make sure the two tabs on the back of the
nozzle window are snapped into the corresponding holes
in the main housing.
3. Re-install lid; refer to page 9.
4. 2-in-1 water tank must be firmly seated to function;
remove and reseat 2-in-1 water tank.
5. Adjust angle; apply more downward pressure.
6. Empty 2-in-1 water tank, refer to page 11.
8 0 0 . 2 3 7 . 7 6 9 1
17