Maintenance & Care - Bissell PET PRO Series User Manual

Emptying the Dirt Tank
WARNING
To reduce the risk of electrical shock, turn power switch o and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
1
The dirt tank should be emptied
before debris reaches the FULL line.
Turn power OFF.
3
Grasp filter tabs and pull vertically to
remove filter cup and empty dirt into
waste container.
Cleaning or Replacing the Brush Roll
1
Turn power OFF and detach motorized
brush if attached OR turn unit over to
access the brush roll.
3
Then simply lift the brush out of the
foot and clean off hair or other debris
from brush roll.
8
www.BISSELL.ca
2
Hold the hand vacuum vertically and
depress the release button on the
front to release the dirt tank.
4
Replace filter back into the dirt tank
and attach dirt tank to hand vacuum
until it snaps securely into place.
2
Use a coin to remove the brush roll,
turning counter clockwise to unlock.
4
Place the cleaned brush roll back into
the foot of unit and use coin to turn
lock clockwise to lock into place.