Synchronizing The Carburetors - Yamaha YZF-R6 99 Service Manual

ADJUSTING THE VALVE CLEARANCE/

SYNCHRONIZING THE CARBURETORS

g. Measure the valve clearance again.
h. If the valve clearance is still out of specifica-
tion, repeat all of the valve clearance adjust-
ment steps until the specified clearance is
obtained.
7. Install:
S all removed parts
NOTE:
For installation, reverse the removal procedure.
Note the following points.
8. Install:
S timing chain guide (exhaust side)
S timing chain tensioner
S pickup coil rotor cover
S cylinder head cover
S spark plugs
S ignition coils
Refer to "CAMSHAFTS" in chapter 4.
EB303010
SYNCHRONIZING THE CARBURETORS
NOTE:
Prior to synchronizing the carburetors, the valve
clearance and the engine idling speed should
be properly adjusted and the ignition timing
should be checked.
1. Stand the motorcycle on a level surface.
NOTE:
Place the motorcycle on a suitable stand.
2. Remove:
S rider seat
S fuel tank
Refer to "SEATS" and "FUEL TANK".
3-16
CHK
ADJ