Yamaha YZF-R6 99 Service Manual page 55

1 AC magneto lead
2 Sidestand switch lead
3 Oil lever switch lead
4 Reservoir tank breather hose
5 Fuel tank breather hose
6 Fuel tank drain hose
7 Speed sensor lead
8 Neutral switch lead
9 Fuel pump lead
A Route the throttle cable through inside of the radia-
tor bracket and outside of the wireharness.
B Fasten the wireharness, radiator hose and fan mo-
tor lead with a plastic band.
CABLE ROUTING
C Do not touch the wireharness with the throttle cable
pully.
Route the wireharness under the radiator hose.
D Route the wireharness through the slit of rear fender.
E Route the rear turn signal light leads (left and right)
through the hole of rear fender.
F Route the seat lock cable outside of the wirehar-
ness.
G Fasten the sidestand switch lead and oil level sen-
sor lead with a band.
H Route the fuel tank drain hose, fuel tank breather
hose, reservoir tank breather hose, oil level switch
lead and sidestand switch lead through the guide
on the frame.
I Route the starter cable between the main switch
lead and left randlebar switch lead.
2-36
SPEC