Assembling The Oil Pump; Installing The Oil Pump; Installing The Oil Strainer; Installing The Oil Pan - Yamaha YZF-R6 99 Service Manual

OIL PAN AND OIL PUMP
EAS00375

ASSEMBLING THE OIL PUMP

1. Lubricate:
S inner rotor
S outer rotor
S impeller shaft
(with the recommended lubricant)
Recommended lubricant
Engine oil
2. Check:
S oil pump operation
Refer to "CHECKING THE OIL PUMP".
EAS00376

INSTALLING THE OIL PUMP

1. Install:
S oil pump 1
NOTE:
Install the oil pump assembly drive chain onto
the oil pump assembly driven sprocket.
EAS00378

INSTALLING THE OIL STRAINER

1. Install:
S oil strainer 1
NOTE:
The arrow a on the oil strainer housing must
point towards the front of the engine.
EAS00380

INSTALLING THE OIL PAN

1. Install:
S dowel pins
S oil pan gasket
S oil pan 1
S oil level switch 2
S engine oil drain bolt 3
NOTE:
S Tighten the oil pan bolts in stages and in a
crisscross pattern.
S Lubricate the oil level switch O-ring with lithium
soap base grease.
4-58
ENG
12 Nm (1.2 mSkg)
New
12 Nm (1.2 mSkg)
10 Nm (1.0 mSkg)
43 Nm (4.3mSkg)