Yamaha YZF-R6 99 Service Manual page 134

ENGINE
EAS00192
INSTALLING THE ENGINE
1. Install:
S engine mounting adjust bolts 1
S rear mounting bolts 2
S self-locking nuts 3
S collars 4
S front mounting bolts 5
S collars 6
S button head bolts 7
S pinch bolts 8
NOTE:
S Lubricate the rear mounting bolt threads with
lithium soap base grease.
S Do not fully tighten the nuts and bolts.
2. Tighten:
S self-locking nut
S front mounting bolts
S button head bolt
S pinch bolt
S engine adjusting bolts
NOTE:
Use the pivot shaft wrench 1 to tighten the en-
gine mounting adjust bolt to finger tightness.
Pivot shaft wrench
90890-01471
3. Install:
S drive sprocket
4. Install:
S drive sprocket cover
NOTE:
Refer to "CABLE ROUTING" in chapter 2.
5. Install:
S shift arm 1
NOTE:
Align the punch mark a in the shift shaft with
the slot in the shift arm.
4-6
ENG
47 Nm (4.7mSkg)
55 Nm (5.5 mSkg)
39 Nm (3.9 mSkg)
M8
24 Nm (2.4 mSkg)
M6
13 Nm (1.3 mSkg)
70Nm (7.0 mSkg)
10 Nm (1.0 mSkg)
10 Nm (1.0 mSkg)