Installing The Front Wheel; Adjusting The Front Wheel Static Balance - Yamaha YZF-R6 99 Service Manual

FRONT WHEEL AND BRAKE DISCS
7-6
Brake disc bolt
18 Nm (1,8 mSkg)
LOCTITE
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjustment
steps until the brake disc deflection is within
specification.
f. If the brake disc deflection cannot be brought
within specification, replace the brake disc.
EAS00545

INSTALLING THE FRONT WHEEL

1. Lubricate:
S wheel axle
S oil seal lips
Recommended lubricant
Lithium soap base grease
2. Tighten:
S wheel axle 1
S wheel axle pinch bolt 2
CAUTION:
Before tightening the wheel axle nut, push
down hard on the handlebars several times
and check if the front fork rebounds
smoothly.
3. Install:
S brake calipers
S brake hose holders
WARNING
Make sure that the brake hose is routed
properly.
EAS00549
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
S After replacing the tire, wheel or both, the front
wheel static balance should be adjusted.
S Adjust the front wheel static balance with the
brake discs installed.
CHAS
72 Nm (7.2 mSkg)
20 Nm (2,0 mSkg)
40 Nm (4.0 mSkg)