Installing The Transmission - Yamaha YZF-R6 99 Service Manual

TRANSMISSION
4. Check:
S transmission gear engagement
(each pinion gear to its respective wheel
gear)
Incorrect ! Reassemble the transmission
axle assemblies.
5. Check:
S transmission gear movement
Rough movement ! Replace the defective
part(-s).
6. Check:
S circlips
Bends/damage/looseness ! Replace.

INSTALLING THE TRANSMISSION

1. Install:
S main axle assembly
S shift fork "C"
S shift drum assembly
S shift fork "R"
S shift fork "L"
S springs
S shift fork guide bars
S drive axle assembly
NOTE:
S Carefully position the shift forks so that they
are installed correctly into the transmission
gears.
S Install shift fork "C" into the groove in the 3rd
and 4th pinion gear on the main axle.
S Install shift fork "L" into the groove in the 6th
wheel gear and shift fork "R" into the groove in
the 5th wheel gear on the drive axle.
S Make sure that the drive axle bearing circlip is
inserted into the grooves in the upper crank-
case.
2. Check:
S transmission
Rough movement ! Repair.
NOTE:
Oil each gear, shaft, and bearing thoroughly.
4-91
ENG