Operation Panel - Olivetti D-COPIA 150 Operation Manual

OPERATION PANEL

Exposure mode selector key and
1
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit
indicator. (p.49)
Light and dark keys and exposure
2
indicators
Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level is
shown by a lit indicator. (p.49) Use to start
and terminate user program setting. (p.53)
Alarm indicators
3
Drum replacement required
indicator (p.56)
Misfeed indicator (p.61)
TD cartridge replacement
required indicator (p.55)
SPF indicator (p.48)
4
(15 cpm model only)
SPF misfeed indicator (p.64)
5
(15 cpm model only)
Copy ratio selector key and
6
indicators
Use to sequentially select preset
reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p.51)
Copy ratio display (%) key (p.51)
7
Display
8
Displays the specified copy quantity,
zoom copy ratio, user program code,
and error code.
SCANNER key and indicator
9
(p.31, p.38)
ON LINE key and indicator
10
Lights up when the unit is used as a
printer and scanner. For description of
the ON LINE indicator, see
"INDICATORS ON THE OPERATION
PANEL" (p.31).
Power save indicator
11
Lights up when the unit is in a power
save mode. (p.52, p.53)
6
Paper feed location indicators
12
Light up to show the selected paper
feed station.
Zoom keys and indicator
13
Use to select any reduction or
enlargement copy ratio from 25% to
400% in 1% increments. (p.51)
Copy quantity keys
14
• Use to select the desired copy
quantity (1 to 99). (p.49)
• Use to make user program entries.
(p.53)
Clear key
15
• Press to clear the display, or press
during a copy run to terminate
copying. (p.49)
• Press and hold down during standby
to display the total number of copies
made to date. (p.54)
Start key and indicator
16
• Copying is possible when the
indicator is on.
• Press to start copying
• Use to set a user program. (p.53)