Save & Restore - Siemens Gigaset C590 IP User Manual

Configuring the phone via the Web configurator
Understanding directory file content (vcf file)
The following data (if available) is written into the vcf file for entry into the directory
or transferred from a vcf file into the handset directory.
u
Name
u
First name
u
Number
u
Number (office)
u
Number (mobile)
u
E-mail address
u
Birthday (YYYY-MM-DD) and time of the reminder call (HH:MM) separated by
a "T" (example: 2008-12-24T11:00).
Other information that a vCard may contain is not entered into the handset direc-
tory.
Example of an entry in vCard format:
BEGIN:VCARD
VERSION:2.1
N:Smith;Anna
TEL;HOME:1234567890
TEL;WORK:0299123456
TEL;CELL:0175987654321
E-MAIL:anna@smith.com
BDAY:2008-12-24T11:00
END:VCARD
Saving and restoring system settings
Once you have configured your base and after each configuration change, you can
save the current base settings in a file on the PC (suffix .cfg).
If you change the settings accidentally or you need to reset the base due to a fault
(base reset), you can reload the saved settings from the file on your PC to your
phone.
The contents of the .cfg file include:
u
The settings for the local network (IP configuration)
u
The data for the (VoIP) connections established
u
The assignment of send and receive connections
u
Your own local area code and access code
u
The network mailbox number
u
The Internet services settings
u
The ECO DECT settings.
You can save and restore the system settings via the Web page:
Settings
180
¢ ¢
Management Save & Restore