Connecting The Base Station; To The Pabx; Dialling Modes And Recall; Save Access Code (Outside Line Code) - Siemens Gigaset S645 Operating Instructions Manual

Connecting the base station to the PABX

Connecting the base station

to the PABX

The following settings are only necessary
when your PABX requires them, see the
PABX User Guide. Make the settings with
your Gigaset S44 handset.
You cannot send or receive text messages
on PABX's that do not support Calling Line
Identification.

Dialling modes and recall

The current setting is indicated by ‰.
Changing the dialling procedure
The following dialling procedures can be
selected:
u
Tone dialling (DTMF),
u
DTMF earth (country-specific),
u
Pulse dialling (DP).
¢ ¢ ¢
v Ð
Base
¢
Dialling Mode
s
Select dialling procedure
(‰ = on) and press
a
Press and hold (idle status).
Set flash time
¢ ¢ ¢
v Ð
Base
¢
Recall
s
Select flash time (‰ = on) and
press
§OK§
a
Press and hold (idle status).
60
Add. Features
.
§OK§
Add. Features
.
Save access code
(outside line code)
Precondition: You may have to enter an
access code for external calls in your PABX,
e.g. "0".
¢ ¢ ¢
v Ð
Base
¢
Access Code
~
Enter or change access code
with max. 3 digits.
¤
Save changes (page 12).
If an access code is saved, the following
applies:
u
The access code is prefixed automati-
cally when you select from the follow-
ing lists: numbers of the SMS centres,
calls list, answering machine list.
u
The access code must be entered when
dialling manually and when manually
entering directory, emergency/direct
call numbers and numbers of the SMS
centres.
u
When you take the number of the
receiver for sending a text message
from the directory you have to delete
the access code.
u
You select an existing access code with
X. To insert a pause or a flash, press
© s
Insert Pause
.
Recall
§OK§
Add. Features
© s
or Insert
§OK§