Connecting The Phone To A Pabx; Dialling Modes And Recall - Siemens Gigaset C590 IP User Manual

Connecting the phone to a PABX

The following settings are only necessary if your PABX requires them; see the PABX
user guide.
Please note
You cannot send or receive SMS messages on PABXs that do not support Calling
Line Identification.
•

Dialling modes and recall

The current setting is indicated by
Changing the dialling mode
The following dialling modes can be selected:
u
Tone dialling (Tone),
u
Pulse dialling (Pulse).
Regardless of the setting options above, after dialling or during a call, the phone
automatically switches to tone dialling (DTMF) e.g., for controlling an answering
machine remotely.
Ï
¢
v
s
Setting recall (fixed line)
By default, your phone is set for operation on the main connection (recall 250 ms).
For operation on a PABX, you may have to change this value. Please refer to the user
guide for your PABX.
¢ Ï
v
s
¢ ¢
Telephony Dialling Mode
Select dialling mode and press
¢ ¢
Telephony Recall
Select recall and press
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms, 400 ms, 600 ms,
800 ms.
Connecting the phone to a PABX
Ø
.
Ø
§Select§
( = selected).
Ø
§Select§
( = set value). Possible values include:
155