Configuring A Network Mailbox For Quick Dial - Siemens Gigaset C590 IP User Manual

Configuring a network mailbox for quick dial

You can use quick dial to make direct calls to a network mailbox.
Assigning key 1, changing assignment
Quick dial settings are device-specific. You can assign a different network mailbox
to key on each registered handset.
No answering machine is preconfigured for quick dial in the default settings.
Or:
¢
v Ì Voice Mail
The list of VoIP connections and the fixed line connection assigned to the handset
as receive connections is displayed. Net AM: xxx where xxx is replaced by the stand-
ard name in the connection (Net AM: IP1 to Net AM: IP6, Net AM: Fixed Line).
s
If a number is already stored for this network mailbox, quick dial is activated
immediately.
a
If no number is saved for the network mailbox, you are asked to enter the number
of the network mailbox.
s
~
§Save§
a
Quick dial is activated.
Please note
You can only assign quick dial to one network mailbox.
You can also call the network mailboxes for the handset's receive connections
directly via the message key
Calling the answering machine via quick dial
If you have set a network mailbox for quick dial you are connected directly to this
network mailbox.
d
You hear the network mailbox announcement.
q
Press and hold key .
¢
Set Key 1
Select entry and press
Press and hold the end call key (idle status).
Jump to the Network Mailbox line.
Enter the number for the network mailbox.
Press the display key.
Press and hold the end call key (idle status).
¢
(
Press and hold.
If necessary, press the speaker key.
Select answering machine and press
Using the network mailbox
§Select§
(Ø = on).
page 120).
§OK§
.
119