Connecting The Base To The Pabx; Dialling Modes And Recall; Saving An Access Code (Outside Line Code); Access Code - Siemens Gigaset S810A User Manual

Connecting the base to the PABX

Connecting the base to
the PABX
The following settings are only necessary if
your PABX requires them; see the PABX user
guide.
You cannot send or receive SMS messages
on PABXs that do not support Calling Line
Identification.
•

Dialling modes and recall

The current setting is indicated by
Changing the dialling mode
The following dialling modes can be
selected:
u
Tone dialling (DTMF)
u
Pulse dialling (PD)
Ï
¢ ¢
v
Telephony
s
Select dialling mode and press
Ø
§Select§
(
Setting recall
Your phone is preset at the factory for oper-
ation on the main connection. For operation
on a PABX, you may have to change this
value. Please refer to the user guide for your
PABX.
Ï
¢ ¢
v
Telephony
s
Select recall and press
Ø
( = set value).
Possible values are:
80 ms, 100 ms, 120 ms, 180 ms,
250 ms, 300 ms, 400 ms, 600 ms,
800 ms.
78
Ø
.
¢

Dialling Mode

= selected).
¢

Recall

§Select§
•
Saving an access code
(outside line code)
Prerequisite: You may have to enter an
access code in front of the number for exter-
nal calls in your PABX, e.g., "0".
Ï
¢ ¢
v
Telephony
~
Enter or change access code,
max. 3 digits.
§Save§
Press the display key.
If an access code has been saved:
u
The access code is prefixed automatically
when you dial a number from the follow-
ing lists: SMS centre numbers, call lists or
answering machine list.
u
The access code must be entered when
dialling manually and when manually
entering directory, emergency/quick dial
numbers or SMS centre numbers.
u
If you copy the recipient's number from
the directory when sending an SMS, you
have to delete the access code.
u
An existing access code is deleted
using Ñ.
¢

Access Code