Activating/Deactivating The Handset; Activating/Deactivating The Keypad Lock; Setting The Date And Time; Operating The Handset - Siemens Gigaset S645 Operating Instructions Manual

Attaching the belt clip
There are notches in the handset at about
the height of the display for attaching the
belt clip.
¤
Press the belt clip to the back of the
handset so that the belt clip clicks into
the notches.
The tongue of the belt clip must face the
battery compartment.
Activating/deactivating
the handset
a
Press the end call key long.
You hear the confirmation
beep.
Activating/deactivating
the keypad lock
#
Press the hash key on the
handset long.
You hear the confirmation beep. The
icon Ø appears in the display when the
keypad lock is activated.
The key lock deactivates automatically if
someone calls you. It re-activates when
the call is finished.
Note:
– The entered emergency number (page 56)
can also be selected with the keypad lock
switched on.
– The handset displays an advisory message
if you press a key by accident while the key-
pad lock is on. To deactivate the keypad
lock, press the hash key

Setting the date and time

Setting the date and time of your phone
on the handset.
¤
If you have not yet set the date and
time, press the display key
the input box.
#
long.
to open
§Time§
To change the time, open the input box
with:
¢ ¢
v Ð
Date/Time
¤
Changing a several line input:
Date:
Enter the day, month and year in 6 dig-
its.
Time:
Enter the hours and minutes in 4 digits,
e.g. Q M 1 5 for
7:15 h.
Press the display key.
§Save§

Operating the handset

Control key

Below, the side of the control key (top,
bottom, right, left) which you have to
press in the respective operating situation
is marked black, e.g. v for "press the
right of the control key".
The control key has a number of different
functions:
When the handset is in the idle state
s
Open the directory.
v
Open the main menu.
u
Open list of handsets.
t
Press briefly: set the ring-
tones of the handset
(page 52).
Press and hold: start voice-
activated dialling (page 23).
In the main menu and in the input boxes
You move the cursor up t, down s, to
the right v or left u with the control
key.
Operating the handset
9