Using The Network Mailbox; Setting The T-Netbox For Fast Access; Viewing A Message From The Network Mailbox - Siemens Gigaset S645 Operating Instructions Manual

Using the network mailbox

Using the network mailbox
The T-NetBox is the answering machine of
your network provider in the network. You
cannot use the network mailbox unless
you have applied to your network pro-
vider.
Setting the T-NetBox for fast
access
You can dial either the T-NetBox or the
integrated answering machine directly in
fast access.
The integrated answering machine is pre-
configured for fast access. You can set the
T-NetBox instead. Ask your network pro-
vider about this.
Setting the T-NetBox for fast access and
entering the number of the T-NetBox
¢ ¢
v Î
Set Key 1
Network Mailb.
Select and press
~
Enter number of the T-NetBox.
©
Press the display key.
Select and press
Save Entry
is stored.
a
Press and hold (idle status).
The setting applies for all registered hand-
sets and the base station.
44
(‰ = on).
§OK§
. The entry
§OK§
Calling the network mailbox
1 / 1
Press and hold the key on
the handset or base station.
This connects you directly to
the network mailbox.
d Press the handsfree key d
on the handset if necessary.
You will hear the announce-
ment of the T-NetBox loud.
Viewing a message from the
network mailbox
When a message arrives for you, you get a
call from the T-NetBox. The number of the
T-NetBox appears in the display when you
have requested Calling Line Identification.
If you accept the call, the new messages
are played back. If you do not accept the
call, the number of the network mailbox
will be stored in the list of missed calls
and the message key flashes (page 24).